Rogaloff Militaria's Double (2 Space) Medal Court Mouting Backing Plate is the perfect solution for both hobbyists and professionals
looking to Court Mount Military Medals.

Manufacturerd in-house, and right here in Australia, our Court Mounting Backing Plates are primarily made from 2mm acrylic
with pre-tapped securing holes, precision cut by laser to ensure consisistency with every unit. A metal backing pin is secured
in a purpose-made recess within the acrylic to provide a flush finish on the reverse of the plate. The backing pins can then be
affixed to the application surface with high quality durable mushroom clip fasteners. 

As not all medals are created equal, depending on the medal(s) required to be mounted, the positioning of the pre-tapped
securing holes to affix the medals to the backing will vary - please check your requirement carefully against the reference
guide below, or contact us direct if you would like to discss a custom solution.


NOTE: There are strict requirements with respect to Mounting Medals as outlined in the respecitve Defence Handbooks - 
Rogaloff Militaira stongly recommends the consultation of these handbooks or a professional Medal Mounter before 
attempting any DIY mounting.

ANY MEDALS SHOWN IN IMAGES ARE FOR REFERENCE PURPOSES ONLY AND ARE SOLD SEPRATELY.

Rogaloff Militaria's Court Mounting Backing Plates are an in-house deisgn, and protected by both 
Australian Registered Design (#202017168) and Copyright.