Single Mini Medal Court Mounting Plate | 16MM x 50mm
or 4 payments of $3.25 with InfoIn Stock
Rogaloff Militaria's Miniature Medal Court Mouting Backing Plates are the perfect solution for both hobbyists and professionals
looking to Court Mount Military Medals.
Manufacturerd in-house right here in Australia, our Court Mounting Backing Plates are primarily made from acrylic
with pre-tapped securing holes, precision cut by laser to ensure consisistency with every unit. The backing pin is affixed
in a purpose-made recess within the acrylic to provide a flush finish on the reverse of the plate. The backing pins are
affixed to the application surface with high quality durable mushroom clip fasteners.
As not all medals are created equal, depending on the medal(s) required to be mounted, the positioning of the pre-tapped
securing holes to affix the medals to the backing will vary - please check your requirement carefully against the reference
guide below, or contact us direct if you would like to discss a custom solution.
NOTE: There are strict requirements with respect to Mounting Medals as outlined in the respecitve Defence Handbooks -
Rogaloff Militaira stongly recommends the consultation of these handbooks or a professional Medal Mounter before
attempting any DIY mounting.
ANY MEDALS SHOWN IN IMAGES ARE FOR REFERENCE PURPOSES ONLY AND ARE SOLD SEPRATELY.
Rogaloff Militaria's Court Mounting Backing Plates are an in-house deisgn, and protected by both
Australian Registered Design (#202017168) and Copyright.
|Unit Of Measure||Each|
More From This Category
or 4 payments of $2.50 with Info
or 4 payments of $3.75 with Info